Marble coloured Magiclay together to make unique beads which can then be used to create exquisite jewellery pieces! Experiment which colours work well together and develop your own lightweight jewellery!
Marbled Magiclay Jewellery
Step 1
To create marbled Paper Magiclay begin with a small piece of white Magiclay and combine it with one or two other pieces of coloured Magiclay.
As you roll the pieces together to form a ball the colours will mix and swirl creating a marbling effect.
Make a number of same size balls and use a needle to pierce a hole through each ball. Set aside to dry.
Step 2
Earrings
Step 1
Thread 3 marbled balls of Magiclay onto an Eye Pin; leave 1cm of the Eye Pin unbeaded. Use Jewellery Pliers to turn back the pin into a loop to secure the beads.
Step 3
Earrings Step 2
Open the Earring Hook with Pliers, hook on the Eye Pin and close the hook with a pair of Pliers.
Step 4
Earrings Step 3
Repeat Steps 1 and 2 to create the second earring.
Step 5
Necklace Step 1
Cut the desired length of memory wire.
Step 6
Necklace Step 2
To start: use a round nose pair of pliers and turn one end 1cm toward length of wire to form a loop. Close the loop with a pair of teeth pliers by pressing on the rounded end of the wire.
Step 7
Necklace Step 3
Place Marbled beads in a row on the table and when satisfied thread these beads onto the Memory Wire.
Step 8
Necklace Step 4
To finish: close the necklace in the same way as step 2 instructions (i.e. turn wire in 1cm).