Derivan Screenprinting Fluorescent Ink 250mL

• 250mL
• Colours are 100% mixable
• Suits mesh sizes 120 Mesh (43T) and 200 Mesh (77T)
• Fixable on cotton, calico, linen, rayon, nylon, polyester, tetron. For best results pre wash fabric to remove any sizing.
• Clean up tools and work areas with warm water and soap

Heat Setting Guide
To set the ink and make it washable simply heat fix with a household iron. Apply heat evenly and continuously over the image. Be sure not to scorch or burn the image or garment by keeping the iron moving constantly. Use a tea towel or another piece of cotton cloth over the image to iron on. Do not use the iron in direct contact with the image. Remove the iron briefly if the garment is getting too hot before continuing.

Cotton, calico, linen, rayon 4-5mins at 140°C -180°C
Synthetics, nylon, polyester, tetron, acrylic 5-8mins at 115°C -130°C
Fabric Paint & Tie Dye Mixing Instructions
Step 1. Add 1 heaped teaspoon of table salt to a 250ml of Screen Ink. This will work with any of the colours.

Step 2. Thoroughly stir the salt into the ink until the mixture becomes as thin as water. At this stage the ink can be used as a fabric paint.

Step 3. Now mix in approximately 1 part mixed screen ink to 10 parts water. Add more water to reduce the colour strength.

Step 4. Once dry heat set with an iron – Cotton, calico, linen, rayon 4-5mins at 140°C -180°C, Synthetics, nylon, polyester, tetron, acrylic 5-8mins at 115°C -130°C