Back to School Specials. Shop Now

Website Maintenance. We will be offline on Thursday, 5th November (7pm to 8pm AEST).

Glass Mosaic Tiles 1kg Tubs

$4995 AUD (ex GST)
$5495 AUD (inc GST)
Taxes, discounts and shipping calculated at checkout.

Earn [points_amount] when you buy this item.


Authentic glass mosaic tiles, packaged in a 1kg tub. Make decorative pieces with these easy-to-use glass mosaics. Use a tile cutter to cut mosaics to required shape and size. Ceramic tile adhesive is used to stick the glass to the working surface. Size of each tile: 25 x 25mm.

Mandala Art  |  SKU: GA001-RE
Colour: Red

Key Features

•Single colours
• Size: 25mm x 25mm tiles

Additional Information

Mosaics Direct Method



Step 1: Draw your design on paper. Place clear plastic sheeting over your design. Choose the tile selection and arrangement.







Step 2: Place a sheet of fibreglass mesh over the drawing (large murals can be broken up by mosaicing individual parts).







Step 3: Use tile adhesive to butter the back of each tile and press onto the mesh. Wipe off excess adhesive around and on the tile's face.







Step 4: Continue to cover your design, leaving a small clean and even gap between each tile.







Step 5: Leave the mesh to dry for a few days. When dry, the tiled mesh can be adhered directly onto the final surface (wall, concrete pavers, cement sheeting, etc.).







Step 6: Put a layer of the ceramic tile adhesive directly onto the surface to be covered. Lay the tiled mesh onto the wet adhesive.







Step 7: Using a damp cloth remove any excess tile adhesive which has oozed around the piece. Allow to dry for 24 48 hours depending on the weather.







Step 8: Wear disposable gloves to mix grout to a creamy consistency and apply with a rag or rubber squeegee. Be mindful of sharp edges.






Step 9: Make sure that excess grout is removed quickly with a soft cloth as it will dry like concrete and will be difficult to remove when dry.

Step 10: Keep polishing the tiles with the cloth until all grout is removed and the tiles look very shiny.

Direct Method Advantages:
Make large murals with a design that fits together like a jigsaw puzzle. The project will be lighter in weight as individual pieces can be added (a large cement sheeting covered in mosaic can be very heavy).
Outdoor Mosaics:
Apply grout additive to the grout mix and when dry, seal the mosaic piece with the additive. If you use a cement adhesive you can pre-colour the adhesive which will reduce or even eliminate the need for grouting.

Specifications (GA001-RE)

  • Catalogue Page Number
    242