MTN Transversal Cap

This MTN Transversal Cap is made to fit the MTN spray paint range and performs just like a chisel tip marker! This cap allows both thin and thick lines depending on the orientation of the can. Ideal for calligraphy lettering and filling large areas.

Fades and other special effects can be achieved by spraying at different angles to the surface. Vary the width and sharpness of a line by spraying up close or far away from the surface. Compatible with MTN 94 and MTN Water Based 300 spray paints.

• Nozzle Size: wide, 9cm line width
• Shape: Chisel (rectangular)
• Performs just like a chisel tip marker! This cap allows both thin and thick lines depending on the orientation of the can.
• Compatible with MTN 94, MTN Water Based 300 spray paints and varnishes
• Comes stock on MTN Universal Spray Primer 400mL White and MTN Acrylic Spray Varnish 400ml Gloss.

Instructions for use

• To change or replace a cap, simply remove the current cap in use by pulling it up and away from the can. With the nozzle pointed away from you, line the new cap up over the outlet and push down gently to insert into the valve.
• Cap care: Purge the cap after use by holding the can upside down and spraying until the paint stops flowing. If the nozzle is blocked soak in paint thinners or replace with a new one.