MTN Universal Spray Primer White 400ml

• Size: 400mL, covers approximately 2.5 x 2.5m
• Nozzle type: Transversal cap – chiselled 4.5cm line width
• Finish: matte
• Colour: white
• Touch dry in 30 minutes, full cure 36 hours
• Recoat after 30 minutes and before two hours
• Fantastic adhesion on glossy non-absorbent surfaces
• Suitable for indoors and outdoors use
• Heat resistant to 100°C
• Works on a variety of surfaces – glass, ceramic, tiles, plastic such as rigid PVC and acrylic (Perspex) and metals like aluminium, copper and zinc (not recommended on anodised aluminium)
• Can be used as a white finishing product
• Safety: protective clothing and respirator mask recommended. Use in a well-ventilated area. Children must be supervised by an adult.

Instructions for use

Before use, shake the aerosol vigorously for approximately one minute.
Apply over clean and dry surfaces. On rusty metallic surfaces: Remove corrosion with a wire brush.
For best results apply in thin layers. Three thin layers are always better than one thick layer and may be recoated after 10 minutes.
Allow to dry for 36 hours. The surface can be sanded lightly for extra adhesion.