FREE Teacher Planner - All Online Orders Over $499

Super Paint Sale - All 500ml is $4.99 Shop Now

Black Friday - Earn Triple Zart Rewards Points on Every Online Purchase.

MTN PRO Indoor Protective Gloss Varnish 400mL

$1595 AUD (ex GST)
$1755 AUD (inc GST)
Taxes, discounts and shipping calculated at checkout.

Earn [points_amount] when you buy this item.


The MTN PRO Indoor Protective Gloss Varnish 400ml is a robust, low odour, water based protective finish that can be used as a final layer to protect and enhance artwork. The gloss finish is a great way to add that final touch to artwork while increasing colour depth and sheen. The low odour formula is less harmful and perfect for school environments. Suitable for indoor and outdoor use, this spray varnish is highly durable with good flexibility, is fast drying, completely transparent and will not yellow over time.

Compatible with MTN 94 spray paints range, MTN Water Based 300 and 400mL range and any permanent acrylic paint (always test on a sample before applying to finished work). Great for a variety of materials including, brick and concrete, plasterboard, canvas, corflute board, Tyvek, wood, metal and plastic.

SKU: PTZ439

Key Features

• Size: 400mL covers approximately 3 x 3m
• Nozzle type: Pocket cap – round 2.5cm medium line width
• Finish: gloss
• Suitable for indoor use only
• Touch dry in 30 minutes, full cure 12 hours, recoat after 20 minutes
• Completely transparent and will not yellow over time
• Suitable for painting on polystyrene
• Highly durable with good flexibility
• Safety: protective clothing and respirator mask recommended. Use in a well-ventilated area. Children must be supervised by an adult.

Additional Information

Instructions for use

Before using, shake the aerosol vigorously for approximately one minute.
Artwork should be completely dry. For best results apply in thin coats at a distance of 15-20cm. Three thin layers are always better than one thick layer and may be recoated after 20 minutes.
After use, hold the aerosol upside down and spray to purge the valve; this will stop the cap from clogging. If the nozzle is blocked, replace it with a new one.
When applied over other paints do a preliminary test first.

Specifications (PTZ439)

  • Catalogue Page Number