MTN Canvas Spray Varnish UV Protectant 400mL

• Size: 400mL, covers approximately 2 x 2m
• Nozzle type: Soft cap – round 3.6cm medium-wide line
• Ideal for permanent media such as acrylic and oil paint, alcohol and water-based inks, spray paint, oil stick, paint markers
• UV light protectant stops artwork from fading
• Protects against dust, grease, humidity and contamination
• Suitable for indoor use only
• Touch dry in 1 hour, fully cured 12 hours
• Completely transparent and will not yellow over time
• Highly durable with good elasticity
• Safety: protective clothing and respirator mask recommended. Use in a well-ventilated area. Children must be supervised by an adult.

Instructions for use:

Before use, shake the aerosol vigorously for approximately one minute.
Artwork should be completely dry. Apply in thin coats at a distance of 15-20cm. To obtain a good quality finish, it is always best to apply three thin coats than one thick coat. Coats should be applied one hour apart.
For old and deteriorated artworks, do a prior cleaning and restoration of the surface and then proceed with the varnish coat. Oil paints should be dry before varnishing. Testing on a small area is recommended before applying to the entire artwork.
After use, hold the aerosol upside down and spray to purge the valve; this will stop the cap from clogging. If the nozzle is blocked, soak in solvent to restore.
When applied over other paints do a preliminary test first.