MTN Water Based 300mL Spray Paint

• Size: 300mL, covers approximately 2 x 2m
• Nozzle type: Pocket cap – round 2.5cm medium line width
• Water based and water soluble (soluble in water during the first 10 minutes of drying)
• Touch dry in 30 minutes, full cure in 72 hours
• Finish: matt
• Reliable low-pressure spray for excellent control
• Does not contain lead or other heavy metals
• Suitable for indoor and outdoor use
• UV and weather resistant
• Suitable for painting on polystyrene
• Safety: protective clothing and respirator mask recommended.
• Use in a well-ventilated area.
• Children must be supervised by an adult.

Instructions for use

Shake the aerosol for approximately one minute after hearing the sound of the mixer.
Apply to clean, dry surfaces. On rusty metal surfaces remove rust with a wire brush. Apply a primer layer on plastics and polyesters.
To obtain a better, brighter finish and maximum coverage apply a layer of matt white primer prior to painting.
For best results apply in thin layers. Three thin layers are always better than one thick layer and may be repainted after ten minutes with the same paint.
After use, hold the aerosol upside down and spray to purge the valve; this will stop the cap from clogging. If the nozzle is blocked, replace it with a new one.